Repair of ignition system of car Peugeot 106

Ignition system (petrol models) — specifications
System type Carburettor models — Breakerless electronic ignition system Fuel-injected models: 954 cc models — Static (distributorless) ignition system controlled by engine management ECU 1124 cc models: Early (pre-July...

General information
Carburettor models On all carburettor models, a breakerless electronic ignition system is used. The system comprises solely of the HT ignition coil and the distributor, both of which are mounted on the left-hand end of...

Ignition system — testing
Warning: Voltages produced by an electronic ignition system are considerably higher than those produced by conventional ignition systems. Extreme care must be taken when working on the system if the ignition is switched...

Ignition HT coil — removal, testing and refitting
Removal Models with a distributor 1. Disconnect the battery negative terminal (refer to " Disconnecting the battery "). 2. Disconnect the hot-air intake hose from the exhaust manifold shroud and air temperature control...

Distributor — removal and refitting
Removal 1. Disconnect the battery negative terminal (refer to " Disconnecting the battery "). If necessary, to improve access to the distributor, remove the ignition HT coil as described in Section 3 and the intake duct...

Ignition system amplifier unit — removal and refitting
Removal 1. Disconnect the battery negative terminal (refer to " Disconnecting the battery "). 2. The amplifier unit is mounted on the side of the distributor body (see illustration). To improve access to the unit,...

Ignition timing — checking and adjustment
Models with a distributor 1. To check the ignition timing, a stroboscopic timing light will be required. It is also recommended that the flywheel timing mark is highlighted as follows. 2. Remove the plug from the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

See similar information for other Peugeot models

➨ Power unit: Ignition system Peugeot 207 (2006-2014)
➨ Gasoline engine: Ignition system Peugeot 306 (1993-2002)
➨ Power unit: Ignition system Peugeot 405 (1987-1997)
➨ Power unit: Ignition system Peugeot 807 (2002-2014)

Link to this section in different formats

TEXTHTMLBB Code

Peugeot 106 (1991-2003)