Share information:
Car clutch repair Peugeot 106
.
Clutch — specifications
Type — Single dry plate with diaphragm spring. Cable-operated release mechanism Clutch pedal travel* — 140±5mm *On later models the clutch cable is automatically adjusted and therefore the pedal travel is not adjustable...
Type — Single dry plate with diaphragm spring. Cable-operated release mechanism Clutch pedal travel* — 140±5mm *On later models the clutch cable is automatically adjusted and therefore the pedal travel is not adjustable...
General information
The clutch consists of a friction plate, a pressure plate assembly, a release bearing and the release mechanism; all of these components are contained in the large cast aluminium alloy bellhousing, sandwiched between...
The clutch consists of a friction plate, a pressure plate assembly, a release bearing and the release mechanism; all of these components are contained in the large cast aluminium alloy bellhousing, sandwiched between...
Clutch — adjustment
Note: The following procedures are only applicable to early models with an adjuster nut located on the transmission end of the cable. On later models (without an adjuster nut) the cable is self-adjusting. 1. The clutch...
Note: The following procedures are only applicable to early models with an adjuster nut located on the transmission end of the cable. On later models (without an adjuster nut) the cable is self-adjusting. 1. The clutch...
Clutch cable — removal and refitting
Removal 1. Working in the engine compartment, release the inner cable and outer cable fittings from the clutch release lever and mounting bracket and free the cable from the transmission housing. On early models, where...
Removal 1. Working in the engine compartment, release the inner cable and outer cable fittings from the clutch release lever and mounting bracket and free the cable from the transmission housing. On early models, where...
Clutch pedal — removal and refitting
Note: Access io the pedal pivot bolt is very poor, and can only be significantly improved by removing the facia as described in Chapter 11 . Removal Right-hand drive models 1. With the use of an assistant, unscrew a...
Note: Access io the pedal pivot bolt is very poor, and can only be significantly improved by removing the facia as described in Chapter 11 . Removal Right-hand drive models 1. With the use of an assistant, unscrew a...
Clutch assembly — removal, inspection and refitting
Warning: Dust created by clutch wear and deposited on the clutch components may contain asbestos, which is a health hazard. DO NOT blow it out with compressed air or inhale any of it. DO NOT use petrol or petroleum...
Warning: Dust created by clutch wear and deposited on the clutch components may contain asbestos, which is a health hazard. DO NOT blow it out with compressed air or inhale any of it. DO NOT use petrol or petroleum...
Clutch release mechanism — removal, inspection and refitting
Note: Refer to the warning concerning the dangers of asbestos dust at the beginning of Section 5 . Removal 1. Unless the engine/transmission is to be removed from the car and separated for major overhaul ( Chapter 2C ),...
Note: Refer to the warning concerning the dangers of asbestos dust at the beginning of Section 5 . Removal 1. Unless the engine/transmission is to be removed from the car and separated for major overhaul ( Chapter 2C ),...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
See similar information for other Peugeot models
➨ Transmission: Clutch Peugeot 206 (1998-2012)
➨ Transmission: Clutch and drive shafts Peugeot 307 (2001-2008)
➨ Transmission: Clutch and drive shafts Peugeot 406 (1995-2004)
➨ Transmission: Clutch Peugeot 605 (1989-2000)
➨ Transmission: Clutch Peugeot 807 (2002-2014)
Link to this section in different formats
TEXTHTMLBB Code
- General information
- Introduction to manual
- Weekly checks
- Maintenance (petrol)
- Maintenance (diesel)
- Troubleshooting
- Power unit
- Petrol engines
- Diesel engines
- Engine overhaul
- Cooling and heating
- Fuel system (carburetor)
- Single point injection (petrol)
- Multipoint injection (petrol)
- Fuel system (diesel)
- Emission control system
- Engine electrical equipment
- Ignition system
- Diesel heating
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Drive shafts
- Chassis, running gear
- Brake system
- Car suspension
- Steering
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Doors, locks and windows
- Electrical equipment
- Equipment and devices
- Electrical diagrams