Manual gearbox of the car Peugeot 106

Manual transmission — specifications
General Type — Manual, four or five forward speeds and reverse. Synchromesh on all forward speeds Designation: Four-speed transmission — MA4 Five-speed transmission — MA5 Gear ratios MA4 transmission: 1st — 3.417:1...

General information
The transmission is contained in a cast aluminium alloy casing bolted to the engine's left-hand end and consists of the gearbox and final drive differential, often called a transaxle. Drive is transmitted from the...

Manual transmission — draining and refilling
Note: A suitable square-section wrench may be required to undo the transmission filler/level and drain plugs on some models. These wrenches can be obtained from most motor factors, or from your Peugeot dealer. 1. This...

Gearchange linkage — general information and adjustment
General information 1. If a stiff, sloppy or imprecise gearchange leads you to suspect that a fault exists within the linkage, dismantle it completely and check it for wear or damage as described in Section 4 ....

Gearchange linkage — removal and refitting
Removal 1. Firmly apply the handbrake, then jack up the front of the vehicle and support it on axle stands (see " Jacking and vehicle support "). 2. Slacken and remove the nut and withdraw the pivot bolt securing the...

Oil seals — renewal
Driveshaft oil seal 1. Chock the rear wheels then jack up the front of the vehicle and support it on axle stands (see " Jacking and vehicle support "). Remove the appropriate front roadwheel. 2. Drain the transmission...

Reversing light switch — testing, removal and refitting
Testing 1. The reversing light circuit is controlled by a plunger-type switch screwed Into the top of the transmission casing. If a fault develops in the circuit, first ensure that the circuit fuse has not blown. 2. To...

Speedometer drive — removal and refitting
Note: Some models do not have a cable-driven speedometer. Removal 1. Chock the rear wheels then jack up the front of the vehicle and support it on axle stands (see " Jacking and vehicle support "). The speedometer drive...

Manual transmission — removal and refitting
Removal 1. Chock the rear wheels then jack up the front of the vehicle and support it on axle stands (see " Jacking and vehicle support "). Remove the front roadwheels. 2. Drain the transmission oil as described in...

Manual transmission overhaul — general information
Overhauling a manual transmission is a difficult and involved job for the DIY home mechanic. In addition to dismantling and reassembling many small parts, clearances must be precisely measured and, if necessary, changed...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

See similar information for other Peugeot models

➨ Transmission: Mechanical gearbox Peugeot 206 (1998-2012)
➨ Transmission: Mechanical gearbox Peugeot 307 (2001-2008)
➨ Transmission: Manual gearbox MA Peugeot 405 (1987-1997)
➨ Transmission: Mechanical gearbox Peugeot 605 (1989-2000)
➨ Transmission: Manual gearbox Peugeot 807 (2002-2014)

Link to this section in different formats

TEXTHTMLBB Code

Peugeot 106 (1991-2003)