Share information:
Car steering system Peugeot 306
Steering — general description
All Peugeot 306 vehicles described in this publication are equipped with a rack and pinion steering system, which can be installed with or without power steering. It should be noted that the steering mechanism on cars...
All Peugeot 306 vehicles described in this publication are equipped with a rack and pinion steering system, which can be installed with or without power steering. It should be noted that the steering mechanism on cars...
Rack and pinion steering mechanism
10.1.1. Removal Place the front of the car on stands. Remove the front wheels. From the engine compartment side, loosen the tie bolt nut (2) in Figure 203. This tie bolt holds the steering shaft crosspiece in the...
10.1.1. Removal Place the front of the car on stands. Remove the front wheels. From the engine compartment side, loosen the tie bolt nut (2) in Figure 203. This tie bolt holds the steering shaft crosspiece in the...
Central steering position
When adjusting and checking the toe-in, the steering must be set to the center position. This is also required for all work that requires the steering to be in the center position. Move the steering wheel all the way to...
When adjusting and checking the toe-in, the steering must be set to the center position. This is also required for all work that requires the steering to be in the center position. Move the steering wheel all the way to...
Replacing the power steering pump drive belt
The replacement and tensioning of the power steering pump drive belt, as well as the corresponding tensioning device, are described in section 4.4 for the corresponding engine types.
The replacement and tensioning of the power steering pump drive belt, as well as the corresponding tensioning device, are described in section 4.4 for the corresponding engine types.
Replacing zero rods
Although the tie rods can be replaced without removing the steering system, it is recommended to remove the steering system as this provides better access to the mounting hardware. Remove the cuff from the steering rod...
Although the tie rods can be replaced without removing the steering system, it is recommended to remove the steering system as this provides better access to the mounting hardware. Remove the cuff from the steering rod...
Wheel alignment angles
Adjustment of the front wheels is carried out with the vehicle under operational load, that is, the vehicle must be unloaded and filled with fuel, oil and water. To meet the prescribed load conditions, measure the...
Adjustment of the front wheels is carried out with the vehicle under operational load, that is, the vehicle must be unloaded and filled with fuel, oil and water. To meet the prescribed load conditions, measure the...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
See similar information for other Peugeot models
➨ Chassis, running gear: Steering Peugeot 106 (1991-2003)
➨ Chassis, running gear: Steering Peugeot 206 (1998-2012)
➨ Chassis, running gear: Steering Peugeot 406 (1995-2004)
➨ Chassis, running gear: Steering Peugeot 605 (1989-2000)
➨ Chassis, running gear: Steering Peugeot Partner I (1996-2008)
Link to this section in different formats
TEXTHTMLBB Code
- User manual
- Keys, doors and alarm
- Controls and instruments
- Driving and operation
- Maintenance
- Power unit
- Petrol engines TU3 and TU5
- Petrol engines EW10
- Diesel engines DV10
- Diesel engines DW10
- Transmission
- Clutch and drive shafts
- Mechanical gearbox
- Automatic gearbox
- Chassis, running gear
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Doors, locks and windows
- Heating and air conditioning
- Electrical equipment
- Equipment and devices
- Power devices
- Airbags
- Electrical circuits
- General information
- Introduction to manual
- Specifications
- Gasoline engine
- Engine repair
- Lubrication system
- Cooling system
- Fuel injection
- Ignition system
- Diesel engine
- Engine repair
- Lubrication system
- Cooling system
- Fuel injection
- Transmission
- Clutch
- Gearbox
- Drive shafts
- Chassis, running gear
- Steering system
- Front suspension
- Rear suspension
- Brake system
- Electrical equipment
- Power devices
- Electrical circuits
- General information
- Maintenance
- Power unit
- Gasoline engines
- Diesel engines
- Cooling system (gasoline)
- Cooling system (diesel)
- Fuel system (gasoline)
- Fuel system (diesel)
- Ignition system
- Transmission
- Clutch
- Mechanical gearbox BB8
- Mechanical gearbox BE1
- Automatic gearbox ZF4
- Shafts, hubs and wheels
- Chassis, running gear
- Brake system
- Car suspension
- Steering
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Electrical equipment
- Equipment and devices
- Headlights and lighting
- Power devices
- Electrical circuits
- Wiring diagrams (diesel)