Specifications and characteristics of car Peugeot 306

Engines — General technical data — Engines with a displacement of 1.4 and 1.6 liters
Engine displacement and type 1360 cm³ (injector) — TU3MC (type code 7AKDX2) 1360 cm³ (carburetor) — TU3.2/K (type code 7AK2D2) 1587 cm³ — TU5JP/Z/L (type code 7ANFZ2) Number of cylinders - 4, in-line The cylinders are...

Engines — Mechanical Specifications — 1.4 and 1.6 Liter Engines
Cylinder head Material - Aluminum Cylinder head height: 111.20±0.08 mm Cylinder head height marked "R" - minimum permissible cylinder head height 111.00 mm The maximum permissible cylinder head tilt is 0.05 mm Cylinder...

Engines — General technical data — Engines with a displacement of 1.8 and 2.0 liters
Engine displacement and type 1761 cm³ — XU7 (type code 7ALFZ2 or 7AL6A2) 1998 cm³ — (8-valve) XU10J2/C/L or XU10J2C/Z (type RFX) 1998 cm³ — (16-valve) XU1010J4/L or XU10J4/Z (type RFX) Number of cylinders - 4 The...

Engines — Mechanical Specifications — 1.8 and 2.0 Liter Engines
Cylinder head Material - Light metal alloy Cylinder head height: 141.0020±0.005 mm (16-valve: 132.00 mm) Cylinder head height marked "R" - minimum permissible cylinder head height - 140.75 mm (8-valve only) The maximum...

Diesel and Turbodiesel Engines — general technical data
Engine displacement and type diesel engine - XU9DA/L (D9B) or XUD9/Y (DJZ) (with or without catalyst) turbodiesel engine - XUD9TE/L (D8A) or XUD9TE/Y (DHY) (with or without catalyst) Cylinder displacement: 1905 cm³...

Diesel and Turbodiesel Engines — mechanical specifications
Cylinder head Cylinder head height (to the centerline of the camshaft) — 140.00±0.05 mm Minimum permissible cylinder head height is 139.55 mm Maximum permissible cylinder head tilt diesel engine - 0.03 mm turbodiesel...

Engine lubrication system
Filling capacity: engines with a displacement of 1.4/1.6 liters, without filter - 3.2 liters engines with a displacement of 1.4/1.6 liters, with a filter - 3.7 liters 1.8-liter engines without a filter, oil pan made of...

Cooling system
Design: Closed forced circulation system with expansion tank. Water pump - Pump with impeller, not repairable. Thermostat: installation - in the cooling system fitting opening temperature - engraved on the thermostat...

Fuel system with carburetor
Carburetor: Installed carburetor types: Solex 32/34Z2 Design - two-chamber carburetor Carburetor assembly 1st stage - 2nd stage Diffuser diameter 32 mm 34 mm Main jet 120 122 Air correction jet 175 180 Idle jet 40 100...

Ignition system
Spark Plugs - Data is provided in Peugeot documents Different engines use different spark plugs. Interelectrode distance: 0.7-0.8 mm

Clutch — technical characteristics
Design - Single-plate dry clutch with diaphragm springs Clutch disc lining dimensions: Outside diameter - engines with a working volume of 1.4 liters - 180.0 mm Outside diameter - engines with a working volume of 1.6...

Transmission
Design: Five-speed gearbox, in one housing with a drive gearbox. Types of installed gearboxes: 1.4-liter engine — MA5 5A 1.6-liter engine — MA 5B 1.8-liter engine — BE3/5N diesel engine — BE3/5N 8-valve engine with a...

Steering system
Design - Rack and pinion steering mechanism Number of teeth on gear: mechanical steering - 6 power steering - 7 Number of teeth on the rack: 28 Front wheel alignment angles: Camber — from 0°20'±30' Longitudinal...

Toe-in — technical characteristics
mechanical steering - -1.00±0.5 mm (negative toe-in) power steering - +1.00±0.5 mm (positive convergence) Kingpin traverse, all models — 11°±30' Front ground clearance: from the ground to the jack installation location...

Front suspension
Design: Separate independent wheel suspension with MacPherson struts with integrated shock absorbers and coil springs, lower wishbones and anti-roll bar. Anti-roll bar diameter: engines with a displacement of 1.8...

Rear suspension
Design: Separate rear wheel suspension with longitudinal arms, transverse torsion bars and telescopic shock absorbers. The anti-roll bar is mounted in the axle tube. Transverse torsion bars - diameter: engines with a...

Brake system
Design: front disc brakes - Bendix or ATE Teves brakes, with one piston per cylinder. rear wheel drum brakes - Bendix or Girling brakes with automatic installation of brake shoes. On models with ABS, drum or disc brakes...

Front wheel brakes — without abs
Types of installed brake calipers: 1.4-liter engines - Bendix, Series IV 2.0-liter engines — Lucas C54 all other models with gasoline engines - Teves FN48 all models with diesel/turbodiesel engines - Teves FN48 Disc...

Rear drum brakes — without abs
Manufacturer: Bendix-Lucas (Girting) Drum diameter: 180.0 mm Maximum allowable diameter is 181.0 mm Wheel brake cylinder diameter: 20.6 mm Brake pressure compensating valves - Built into the wheel brake cylinders Brake...

Rear disc brakes — without abs
Installed on: - Models with 2.0 liter engines Manufacturer: Bendix Brake disc diameter: 247.0 mm (ventilated) Brake disc thickness: 8.0 mm The minimum permissible thickness of the brake disc is 6.0 mm Maximum runout of...

Bendix brake system with ABS
Construction - Bendix, front disc and rear drum brakes Installed on models with 1.4-liter and diesel engines Front brake disc diameter: 247.0 mm The thickness of the front brake discs is 20.4 mm (ventilated) Minimum...

Bosch 2E brake system with ABS
Construction - Bosch, front disc and rear drum brakes Installed on models with turbodiesel engines Front brake disc diameter: 247.0 mm The thickness of the front brake discs is 20.4 mm (ventilated) Minimum permissible...

Bosch LE2 brake system with ABS
Construction - Bosch, front disc and rear disc brakes Installed on models with engines with a displacement of 1.8 and 2.0 liters Front brake disc diameter: 247.0 mm The thickness of the front brake discs is 20.4 mm...

Electrical equipment — technical data
Battery Voltage - 12 volts Capacity - up to 50 ampere hours, depending on the engine type State of charge: fully charged - 1.285 g/cm¹ or 32°Baume charged to 75% - 1.242 g/cm³ or 28° Baume charged to 50% - 1,200 g/cm³...

Fuel injection device — diesel engine with a working volume of 2.5 liters
Fuel injection device - Lucas Installed on: - XUD 9A/L type engines Pump identification number: XUD101-844389528 Static injection moment - engraved on the pump lever Idle speed: 800 +0\-50 rpm (850 +0\-50 rpm with air...

Bosch fuel injection system
Installed on: - XUD 9A/L type engines Pump identification number is VER425.1 201 Pump design - Piston distribution pump Static injection timing, at top dead center (pump piston stroke): — 1.07±0.02 mm Dynamic adjustment...

Tightening torques for threaded connections
TU type engines Cylinder head bolts - aluminum cylinder block: - first pass 20 Nm second pass tightening at an angle of 240° Cast iron cylinder block: first pass - 20 nm second pass tightening at an angle of 120° third...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

See similar information for other Peugeot models

➨ General information: Specifications Peugeot J5 (1981-1993)

Link to this section in different formats

TEXTHTMLBB Code