Manual gearbox of car Peugeot 306

Gearbox — general description
The 306 series vehicles are equipped with two different gearbox designs, depending on the engine installed. The TU engine is equipped with a five-speed MA5 gearbox. However, there are differences between the 1.4- and...

Removal the gearbox
If only the clutch or driven disc needs to be replaced, for example, the gearbox can be removed without removing the engine. This requires a roller garage jack and the engine must also be raised. Naturally, Peugeot...

Installing a gearbox
The gearbox is installed in the reverse order, however the following points should be taken into account depending on the engine installed: On all engines: Regardless of whether work has been carried out on the gearbox...

Gearbox repair
Given the presence of two different gearbox designs and the differences within each design, a description of the disassembly and assembly of the gearbox is not provided. If there is any fault in the gearbox, it is...

Transmission oil
The gearbox oil filler plug is located directly on the side under the cover. To unscrew the screw, a square key is required. To check the oil level in the gearbox, insert your finger into the hole. If your finger...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

See similar information for other Peugeot models

➨ Transmission: Manual gearbox Peugeot 106 (1991-2003)
➨ Transmission: Mechanical gearbox Peugeot 206 (1998-2012)
➨ Transmission: Mechanical gearbox Peugeot 406 (1995-2004)
➨ Transmission: Mechanical gearbox Peugeot 605 (1989-2000)
➨ Transmission: Gearbox Peugeot J5 (1981-1993)

Link to this section in different formats

TEXTHTMLBB Code