Car maintenance Peugeot 807

Car care
Car wash Environmental protection laws prohibit washing cars in unauthorized areas. If you frequently wash your car in an automatic car wash, the rotating brushes will leave marks on the paint finish. This can be...

Starting the engine using an auxiliary battery
Precautionary measures If the prescribed procedure is not followed, there is a risk of burns from acid released from the battery. In addition, there is a risk of injury and damage if the battery explodes. Damage to the...

Towing a car
When towing a vehicle, the cable or rigid coupling should only be attached to the towing hooks. 1. Use a screwdriver to pry off the hole cover on the front or rear bumper (see illustration). 3.1 Use a screwdriver to pry...

Jacking up a car
When working under a vehicle, it should be positioned and securely supported on two or four jack stands if it is not on a lift. If the car is raised with a jack, then in this case only the wheels can be changed. All...

Maintenance — operations
In order to ensure reliable operation of the vehicle, it is necessary to carry out its maintenance in a timely manner. Most car maintenance and service jobs can be done by yourself. In some cases, vehicle servicing...

Cooling system — check
Please note: Coolant replacement is not required as part of maintenance. GLYSANTIN G33 or REVKOGEL 2000, which has anti-corrosion and frost-protective properties, is used as a coolant. At the same time, the condition of...

Brake system — check
Brake fluid Brake fluid should be replaced once every two years. The procedure for filling the brake fluid and bleeding the brake system is given in the relevant chapter. The brake fluid expansion tank is located above...

Suspension and steering — check
1. Place the front of the vehicle on jack stands. 2. Inspect the CV joint boots and steering rack seals and ensure there are no cracks, worn areas, or signs of material aging. Any damage to the boots or seals will lead...

Exhaust system — visual inspection
1. Place the vehicle on jack stands. 2. Check the strength of the clamps and mounting flanges. 3. Inspect the exhaust system. Make sure there are no holes, rusted parts, or abrasions. 4. Replace exhaust pipes that have...

Gearbox — visual inspection for leaks
Transmission oil leaks may occur in the following places: at the junction between the cylinder block and the gearbox; on the oil filler plug; on the drain plug at the junction of the gearbox and the front wheel drive...

Replacement air filter element
The replacement of the replaceable filter element of the air filter is carried out at a mileage of 60,000 kilometers, but sometimes replacement is necessary earlier (see illustrations 11.0, 11.0a, 11.0b, 11.0c, 11.0d,...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

See similar information for other Peugeot models

➨ General information: Maintenance (diesel) Peugeot 106 (1991-2003)
➨ General information: Maintenance Peugeot 206 (1998-2012)
➨ General information: Maintenance Peugeot 305 (1977-1989)
➨ General information: Maintenance Peugeot 405 (1987-1997)
➨ General information: Maintenance Peugeot 605 (1989-2000)

Link to this section in different formats

TEXTHTMLBB Code

Partner I (1996-2008)