6.1 Press out the retaining tabs and remove the mounting compartment 1 under the heater switch panel
2. Remove head 2 shift lever (see illustration 6.1).
3. Remove the four screws 3 (see illustration 6.1).
4. Remove rear ashtray 5 (see illustration 6.1).
5. Remove the protective cover 4 of the gear lever (see illustration 6.1).
6. Remove bolt 6 and then two bolts 7 (see illustration).
6.6 Remove bolt 6 and then two bolts 7
7. Remove the overlay 8 of the parking brake lever (see illustration 6.6).
8. Press the pad 9 from the parking brake lever by prying the holder 10 with a screwdriver (see illustration 6.6).
9. Disconnect the plugs of the switches that are connected to the rear of the center console.
10. Apply the parking brake.
11. Raise the rear part 11 of the center console and feed it in the direction indicated by the arrow in the illustration.
6.11 Lift the rear part 11 of the center console and move it in the indicated direction (see arrow)
12. Disconnect plugs and remove a back part of the central console.
13. Disconnect the air duct 15 from the deflector 13 by unscrewing the bolt 12 and removing the flange 14 (see illustration).
6.13 Disconnect the air duct 15 from the deflector 13 by unscrewing the bolt 12 and removing the flange 14
14. Unscrew the bolts 16, 17, 18 and remove the support 19 (see illustration).
6.14 Unscrew bolts 16, 17, 18 and remove support 19
15. Remove the parking brake console 20 by pushing it forward (see illustration 6.14).
Installation of a back part of the central console is made in sequence, return to removal.