Car clutch repair Peugeot 605

General information about the clutch
Peugeot 605 vehicles are equipped with a clutch with hydraulic or cable drive. On vehicles with a manual transmission, the clutch is the unit that connects (and divisive) engine as a source of torque with the rest of...

Clutch pedal — removal
Attention! The procedure is given using the example of cars with a cable-operated clutch. 2.0 Make sure that hole 1 on clutch slave cylinder 2 is positioned as shown in the illustration 1. Remove the lower cover under...

Clutch pedal — installation
8. Check the condition of spring 11 for wear and mechanical damage (see illustration). 9. Install the clutch pedal into its seat. 10. Tighten nut 7 of the pedal axle 8 with a force of 35 Nm, and bolts 6 with a force of...

Clutch — removal
1. Remove the gearbox (see the relevant chapter). 2. Mark the mounting position of the pressure plate on the flywheel. 3. Lock the flywheel with a screwdriver and a punch or a suitable stop shoe, securing it to the...

Clutch — installation
7. Check the condition of the pressure plate for wear and mechanical damage. Make sure there are no cracks, burn marks or ribs on its surface. 8. Check the bearing surface of the pressure plate for cracks, burns and...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

See similar information for other Peugeot models

➨ Transmission: Clutch Peugeot 106 (1991-2003)
➨ Transmission: Clutch Peugeot 206 (1998-2012)
➨ Transmission: Clutch Peugeot 305 (1977-1989)
➨ Transmission: Clutch and drive shafts Peugeot 406 (1995-2004)
➨ Transmission: Clutch Peugeot 806 (1994-2002)

Link to this section in different formats

TEXTHTMLBB Code