Manual gearbox car Peugeot 605

Manual Transmission Specifications
Manual Transmission Specifications

General information about mechanical transmission
Peugeot 605 cars are equipped with a five-speed manual transmission VEZ-5, ML5T, ME5T and MG5T (see illustrations 1.0 - 1.0d). The VEZ series gearbox can be either 5- or 6-speed. The gearbox is housed in an aluminum...

Gear Shift Mechanism — Removal
Cars with manual transmission ML5T 1. Remove the exhaust pipe. 2. Remove the heat shield. 3. Remove clamps 1 and 2 and using a suitable puller, such as puller 0216-G1 for 10 mm, disconnect the end of the cable traction...

Gear Shift Mechanism — Installation
The gear shift mechanism is installed in the reverse order of removal, taking into account the following: 17. Clamps 1 and 2 (see illustrations 2.3 and 2.12) must be replaced after each dismantling. 18. Make sure that...

Gearshift box-removal
Cars with manual transmission VEZ 1. Open the hood and fix it in this position. 2. Drain the coolant. 3. Remove the battery. 4. Disconnect the air intake 1 (see illustration). 3.4 Disconnect the air intake 1 5. Remove...

Gearbox — installation
80. Replace the gearbox seals, installed holes for the drive shafts. This replacement of the seals does not depend on whether any repair work was carried out on the gearbox or not, since when disconnecting the drive...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

See similar information for other Peugeot models

➨ Transmission: Manual gearbox Peugeot 106 (1991-2003)
➨ Transmission: Mechanical gearbox Peugeot 207 (2006-2014)
➨ Transmission: Mechanical gearbox Peugeot 307 (2001-2008)
➨ Transmission: Manual gearbox BE Peugeot 405 (1987-1997)
➨ Transmission: Mechanical gearbox Peugeot 806 (1994-2002)

Link to this section in different formats

TEXTHTMLBB Code