Steering — general information The steering consists of a steering wheel, a steering column, a steering mechanism, transverse steering rods and their tips. The steering wheel is mounted on the steering column and transmits power to the rack and...
Steering gear — removal and installation 1. Remove the splash guard of the engine compartment (if provided). 2. Drain hydraulic fluid. 3. Jack up the front of the vehicle, place it on jack stands and remove the front wheels. 4. Unscrew the nuts 1 of the...
Steering wheel — removal and installation 1. Set the front wheels in the direction of travel in a straight line. 2. Remove trim 1 from the steering wheel in order to gain access to the nut 2 securing the wheel in bulk (see illustration). 14.2 Remove trim 1 from...
Paddle switch block — removal and installation 1. Unscrew bolts 1 and remove the lower part of the casing of the steering column (see illustration). 15.1 Unscrew the bolts 1 and remove the lower part of the steering column cover 2. Release the steering column height...
Power steering pump — removal and installation Vehicles with 6-cylinder petrol engine ES9J4 1. Remove the accessory drive belt (see relevant chapter). 2. Drain hydraulic fluid. 3. Unscrew bolts 1 (see illustration). 16.3 Remove bolts 1. Tightening torque 19 Nm 4....
Power Steering Hydraulic — Fluid Change and Bleeding Attention! Draining the used fluid should be done with the engine off. For replenishment and filling, use only fresh fluid, eliminating the ingress of impurities into the hydraulic drive. Draining hydraulic fluid 1....
Wheel alignment The accuracy of wheel alignment affects the effectiveness of steering, vehicle stability on the road, and tire wear. On the described models, the camber and convergence of both the front and rear wheels are regulated....