2. Remove the steering wheel cover 1 to gain access to the nut 2 securing the wheel on the shaft (see illustration).
14.2 Remove the cover 1 from the steering wheel to gain access to the nut 2 securing the wheel to the shaft
3. Mark the position of the steering wheel on the shaft, then unscrew nut 2 and remove steering wheel 3 from the shaft (see illustration 14.2).
The steering wheel is installed in the reverse order of removal.
4. The tightening torque of the steering wheel mounting nut on the shaft is 30 Nm.
[You can find the original on the resource PEUGEOTBOOK.ru]