Clutch Specifications Type - Single disc, dry diaphragm spring Manufacturer − Valeo or LUK Clutch disc diameter: 1.8/2.0 l petrol engines - Valeo, diameter 215 mm or 228 mm (with turbocharger) diesel engines with a volume of 1.9 / 2.1 l -...
General description of clutch On vehicles with a manual transmission, the clutch is the junction that connects (and divisive) engine as a source of torque with the rest of the drive parts. At the moment of starting the movement, the clutch gently...
Clutch — removal Attention! Pressure plate and diaphragm spring are not separated and are therefore replaced as a set if damaged. The manufacturer is constantly improving the design of the pressure and driven discs. For this reason, the...
Clutch — repair If it is known that the driven disk or the pressure disk must be replaced, then there is no need to inspect them. However, usually after removing the clutch, their condition is checked. 6. Check up a condition of...
Clutch — Installation The clutch is installed in the reverse order of removal. 13. Fasten the clutch to the flywheel, following the marks made before removal, if the old clutch is being installed. 14. Center the driven disc on the flywheel...
Clutch release bearing To replace the release bearing, the transmission must be removed. 1. Remove the bearing from the clutch release fork and gearbox input shaft. Attention! The bearing is housed in a housing filled with long life grease at...
Clutch Fault Identification and Troubleshooting Clutch slipping Worn clutch disc Replace driven disk Weak pressure plate Replace pressure plate Oily friction lining Replace the clutch disc. Repair oil leak Clutch overheating Replace the driven disk, and if necessary,...