Diesel engine specifications High pressure fuel pump − With rotary distributor on XUD9TF engines with exhaust gas aftertreatment type L or Y − Bosch VE 49F on XUD11BTE − Bosch LPO1 engines Only XUD9TF engines with exhaust gas aftertreatment type L...
General description The 1.9 liter engine from the XUD9 family has been installed since about December 1994 and works with a injection pump with a Bosch distributor rotor. The engines are equipped with an exhaust gas recirculation system....
Precautions when working on the diesel engine power system When performing any work on the diesel engine power supply system, cleanliness must be observed. 1. We tell you how to disconnect or connect the power wire to the injection pump or preheater, you must turn off the...
Nozzles — removal and installation Injector failure is manifested in: A) interruptions in ignition; b) knocking in the cylinder or in several cylinders; V) engine overheating; G) reduction in effective engine power; d) the appearance of excessive black...
Glow plugs — removal and installation Checking the glow plugs for conductivity is possible only after they have been removed. To check, you need a tester with a diode incandescent bulb. It is recommended to have the glow plugs checked by a workshop. Glow...
Fuel filter — replacement of the filter element, removal of condensate The replaceable filter element of the fuel filter is replaced in accordance with the mileage, which is noted in the service book. In addition to the appropriate replacement of the filter cartridge, the fuel filter...
High pressure fuel pump — adjustment Bosch injection pump adjustment is only possible for 1.9 liter XUD9TF engines. Due to the fact that the power supply system for engines with a volume of 2.1 liters is electronically regulated, it is recommended that...