Car engine lubrication system Peugeot 806

Engine lubrication system
A circulation lubrication system is used to lubricate the engine. The gear oil pump, located in the engine crankcase and driven by a chain from the crankshaft, generates the necessary pressure to supply oil to the...

Oil pump — removal and installation
26.0 Location of the oil pump in the engine crankcase. 1 - oil pump 2 - drive chain 3 - spacer plate (if installed) 4 - oil pump drive sprocket on the crankshaft The oil pump can be removed without removing the engine...

Oil filter
The oil filter has a bypass valve. Installation of a filter without a valve is not permitted. When purchasing an oil filter, you must specify the engine type and year of manufacture. To remove the filter, use a special...

Oil radiator
As already mentioned, diesel engines, as well as some other models, are equipped with an oil cooler. The oil cooler is installed between the cylinder block and the oil filter and is connected to the engine cooling...

Oil pressure — checking
If you suspect that your engine oil pressure is not correct, we recommend contacting a repair shop. To check the oil pressure, you need a pressure gauge with a corresponding adapter, which is screwed in place of the oil...

Engine oil leak
Engine oil leakage from the engine is a source of environmental pollution. In addition, during the technical inspection, certain claims may be made regarding the condition of the vehicle. For this reason, you should...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

See similar information for other Peugeot models

➨ Power unit: Lubrication system Peugeot 207 (2006-2014)
➨ Diesel engine: Lubrication system Peugeot 306 (1993-2002)

Link to this section in different formats

TEXTHTMLBB Code

Partner I (1996-2008)