Clutch — description and specifications The clutch consists of a driven (frictional) disc, clutch cover with pressure plate and diaphragm spring and clutch release mechanism. Technical data and specifications Type dry, single disc, with diaphragm spring, with...
Bleeding the hydraulic clutch Attention! Use recommended DOT4 brake fluid during bleeding operation. Do not use an automatic bleeder (in this case, the formation of air bubbles in the liquid filling the circuit is possible). Remove air in the...
Removal and installation of a cable of a drive of coupling Gearbox BE4 Remove the clutch cable in the following order: remove the battery; remove the stand under the battery; remove the air filter with sleeves; Pic. 6.5. Cable drive clutch (gearbox BE4): 1 - tip of the cable...
Removal, check and installation of coupling Remove the clutch from the engine flywheel in the following order: remove the gearbox from the engine; Pic. 6.12. Clutch details: 1 - gearbox; 2 - input shaft; 3 - clutch release bearing; 4 - casing with pressure plate;...
Clutch drive adjustment Vehicles with BE4 gearbox Before you start adjusting the clutch actuator, check the following: Pic. 6.13. Clutch Parts Check: 1 - latch; 2 - bushing; 3 - spring; 4 - emphasis lack of a mat on the bottom stop 4 (pic....
Removal, check and installation of the hydrotransformer Remove the torque converter in the following order: remove the gearbox; Pic. 6.18. Removing the torque converter: 1 - torque converter; 2 - fixtures install fixtures 2 (pic. 6.18); pull the torque converter and remove...