Interior (internal body elements) Peugeot 207

Replacing the front seat belt
Partially remove the door seal. Remove the adjusting knob (1) (in the direction of arrow "a"). Remove the interior trim panels (2) and (3). Unscrew bolts (4), (5) and (6). Remove the seat belt ramp (7). Unlock the...

Replacing the rear seat belt
Disconnect the battery. Remove the trunk mat. Fold down the rear seats (1). Remove the mount (2) (on each side). Remove the rear pillar trim panels (3). Remove from each side: fastening (4) of the rear seat belt bracket...

Replacement of the center console (3- and 5-door hatchback)
Move the front seats as far back as possible. Remove the decorative elements (1). Loosen the screws (2). Release the decorative element of the gear lever base (3) from the clips (depending on the configuration option)...

Center console replacement (station wagon)
Move the front seats as far back as possible. Remove the decorative elements (1). Loosen the screws (2). Release the protective cover from the clamps (or a decorative overlay) gear shift lever bases (depending on the...

Replacing the upper front part of the control panel
Turn off the ignition and disconnect the battery. Detach the decorative element of the upper front part (1) (in area "a"). Remove the decorative element of the ventilation grille (1). Loosen the bolts (in area "c")....

Replacing the control panel ventilation grille
Detach the fuse box access trim (1) by pulling the upper part towards you (in the direction of arrows "a" and "b"). Remove the fuse box access trim. Release the decorative element (2) from the retainers (in zones "c",...

Replacing the glove box lid and lock
Loosen the screws in area "a". Open the glove compartment lid (1). Release the left and right loops (2) through the slots (in zone "b"). Release the right loop (2) (in area "c"). Remove the glove compartment cover (1)....

Replacing the central front part of the control panel
Turn off the ignition and disconnect the battery. Remove the car radio. Detach the decorative elements (1) in area "a" and remove. Loosen the screws (3). Remove the control unit kit (2) (eSP systems, centralized...

Replacing a car radio
Special device: 1 - grips for removing the car radio. Disconnect the battery. Insert the two claws [1] into the holes (A) of the car radio (1). Press the latches until they stop, then remove the car radio by pulling it...

Replacing the glove box
Disconnect the battery. Open the glove compartment. Detach the cover (1) in area "a" and remove. Disconnect and remove the control round regulator (2) (depending on the configuration option). Loosen screws (3) and (4)....

Removal and installation the control panel
Removal Disconnect the battery. Remove the following items: center console; steering column; driver's knee airbag (if installed); glove box; ventilation grilles; instrument cluster; central part of the control panel;...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

See similar information for other Peugeot models

➨ Body and interior: Interior (internal elements) Peugeot 106 (1991-2003)
➨ Body and interior: Interior (internal elements) Peugeot 305 (1977-1989)
➨ Body and interior: Interior (internal elements) Peugeot 406 (1995-2004)
➨ Body and interior: Interior (internal elements) Peugeot Partner I (1996-2008)

Link to this section in different formats

TEXTHTMLBB Code