Table of contents: Manual air conditioning control 🠇 Automatic air conditioning control 🠇
Turn off the ignition and disconnect the battery.
Remove the car radio.
Detach the decorative elements (1) in area "a" and remove.
Loosen the screws (3).
Remove the control unit kit (2) (eSP systems, centralized locking), pulling them towards you.
Disconnect the connectors in area "b" (depending on the configuration).
Remove the control unit kit (2) (eSP systems, centralized locking).
Loosen the screws (5).
Remove the air conditioning control unit (4).
 |
 |
Disconnect in area "d" by turning (in the direction of arrow "c") the air conditioning control unit (4) to gain access to the electrical harness connections.
Manual air conditioning control
Caution: Mark the position of the cables (6) before disconnecting them.
Disconnect the connectors in area "e".
Disconnect the cables (ropes) (6) (in area "f").
Remove the air conditioning control panel (4a).
Automatic air conditioning control
Disconnect the connectors in area "g".
Remove the automatic air conditioning control panel (4b).
Install the parts in reverse order.
 |
 |
Connect the battery and check the operation of the electrical equipment.