Detach decorative elements (1).
Loosen the screws (2).
Release the protective cover from the latches (or decorative trim) gear lever base (depending on configuration).
Remove the bolt covers (in the zone «A»).
Remove the bolt (3).
Raise the parking brake lever.
Remove the ashtray.
Detach the console cover (5) (in the zone «b»).
Disconnect the cigarette lighter socket.
Remove console cover (5).
Release the parking brake lever.
Release the gearshift board from the retainers (6).
Disconnect the connectors in the area «With» (depending on configuration).
Remove the board (6).
Remove the center console (7) (in the direction of the arrow «d»).
Lift up the front of the center console and remove it.
Install the parts in reverse order.
tighten the nut (3) torque 8 Nm.
Check the operation of the electrical equipment.