Remove the trunk mat.
Fold back the rear seats (1).
Remove the mount (2) (from each side).
Remove the rear trim panels (3).
Remove from each side:
- fastening (4) rear seat belt buckles (5);
- retainer (6) inertia coil rear seat belt (7).
Remove the rear seat belt assembly (8).
Disconnect connectors (9) (depending on equipment variant).
Remove fasteners (10) and rear seat belt buckles (11).
Install the parts in reverse order.
Tighten:
- fastening (10) torque 30 Nm;
- mounts (2), (4), (6) torque 25 Nm.
Connect the battery.
Initialize all electronic elements.
Check the operation of the electrical equipment.