Engine starting Apply the parking brake. Automatic transmission: set the gear selector to «R» or «N». Manual transmission: Place the shift lever in neutral and keep the clutch pedal fully depressed. Insert the key into the ignition...
Automatic transmission 1. Selector lever. 2. Sport program key «S». 3. Program key «snow driving». Selector lever positions Parking (R): Used to stop the car in a parking lot, while the parking brake can be on or off. This mode is also used...
On-board tire pressure monitoring system The system is designed for automatic control of air pressure in tires. During movement, special sensors mounted in the valves turn on the corresponding signaling device when the pressure drops below normal (at speeds...
Anti-lock braking system (ABS) and electronic brake force regulator (REF) The operation of these systems improves the stability and control of the vehicle during braking, in particular on roads with damaged or slippery surfaces. The anti-lock braking system is activated automatically as soon...
Dynamic Stability Program (ESP) and Traction Control (ASR) The traction control system optimizes the distribution of traction between the wheels to avoid spinning by affecting the operation of the brakes of the drive wheels and the operation of the engine. The dynamic...
Speed control (cruise control) The system maintains the vehicle speed set by the driver. The programming of the limiter and governor is done manually: it can be programmed for a speed of at least 30 km/h. The programmed speed parameter remains in the...
Anti-corrosion body protection When assembling, the car undergoes a very thorough anti-corrosion treatment at the factory. Body parts are made of galvanized steel sheet. A wear-resistant anti-corrosion compound is applied to the bottom of the car....