Doors, locks and windows of the car Peugeot 206

Windshield replacement
Removal Remove the windshield in the following order: remove the windshield washer tube; Figure 11.16. Removing the hood: 1 - hood mount; 2 - hood; 3 - windshield wiper arms; 4 - shield grilles disconnect fasteners 1...

Installation and adjustment of the front door
Figure 11.23. Parts for mounting the front door: 1, 2, 3 - gaskets To install the front door, it is necessary to make three parts, 2 pieces each, in accordance with Figure 11.23. Figure 11.24. Mounting kit: 1 -...

Installing the rear door
Figure 11.23. Parts for mounting the front door: 1, 2, 3 - gaskets To install the rear door, it is necessary to make three parts, 2 pieces each, in accordance with Figure 11.23. Figure 11.30. Mounting kit: 1 - centering...

Adjusting the door lock bracket
If the door is difficult to close after adjusting the gaps between the door and the body, adjust the door lock bracket as follows: Figure 11.34. Adjusting the position of the door lock bracket: 1 - screws; 2 - bracket...

Removal and installation the front door opening mechanism
Remove the front door opening mechanism in the following order: raise the glass; remove the door trim panel; remove the sealing element; Figure 11.35. Removing the traction: 1 - traction remove rod 1 from the clamps...

Removal and installation the front door trim panel
Remove the front door trim panel in the following order: open the door; lower the glass all the way down; Figure 11.38. Removing the front door trim panel: 1 - clamping element; 2 - fastening element; 3 - decorative...

Removal and installation the rear door trim panel
To remove the rear door panel, proceed as follows: open the door; lower the glass all the way down; Figure 11.39. Removing the rear door trim panel: 1 - clamping element; 2 - fastening element; 3 - decorative element; 4...

Removal and installation the tailgate
Remove the luggage compartment door in the following order: remove the rear shelf; recline the backrest or backrests of the rear seat; Figure 11.41. Removing the window trim: 1 - fastening elements; 2 - window trim...

Removal and installation the rear window washer jet
Remove the rear window washer nozzle in the following order: open the trunk door; Figure 11.44. Removing the brake light mount: 1 - nuts unscrew nuts 1 (figure 11.44) brake light mounts; press the latches and remove the...

Removal the door glass
Remove the glass in the following order: remove the inner door trim; remove the plastic inserts from the top of the insulation pad, then carefully remove the pad so that access to the door handle and lock is opened;...

Removal the window regulator
Remove the window regulator in the following order: to facilitate access to the window regulator latches and guides, lower the window approximately 2/3 of the way; Note: The front door glass has two retainers and two...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

See similar information for other Peugeot models

➨ Body and interior: Doors, locks and windows Peugeot 106 (1991-2003)
➨ Body and interior: Doors, locks and windows Peugeot 307 (2001-2008)
➨ Body and interior: Doors, locks and windows Peugeot 406 (1995-2004)
➨ Body and interior: Doors, locks and windows Peugeot Partner I (1996-2008)

Link to this section in different formats

TEXTHTMLBB Code