- remove the rear shelf;
- fold down the backrest or backrests of the rear seat;
Pic. 11.41. Removing the window trim: 1 - fastening elements; 2 - window trim
- remove items 1 (pic. 11.41) fastenings;
- remove trim 2 vents;
Pic. 11.42. Disconnecting the wiring harness: 1 - wiring harness; 2 - wire «masses»; 3 - pin connector
- release the pin connector 3 from the clamps (pic. 11.42);
- unfasten wire 2 «masses»;
- move the wiring harness 1;
- disconnect the washer tube from the opposite side;
Pic. 11.43. Removing the tailgate: 1 - telescopic stops; 2 - fastening elements; 3 - wire harness covers
- push back the ribbed covers 3 (pic. 11.43), protecting wiring harnesses;
Note. An assistant is required to continue operations.
- while holding the tailgate, remove the telescopic stops 1;
- remove fastening elements 2;
- remove the tailgate.
Install the tailgate in the reverse order of removal.