- remove the gearbox;
Figure 6.18. Removing the torque converter: 1 - torque converter; 2 - devices
- install accessories 2 (figure 6.18);
- pull the torque converter and remove it;
Caution! There is a significant amount of oil in the torque converter.
Figure 6.19. Removing the oil seal: 1 - oil seal
- using a tool, remove the seal 1 (figure 6.19).
Check before installing the torque converter:
- torque converter centering element;
- bearing surface of the torque converter seal;
- three attachment points;
- oil pump drive flats;
- torque converter shaft splines.
Install the torque converter in the following order:
Figure 6.20. Installing the seal: 1 - oil seal; 2 - device
- install with tool 2 (figure 6.20) seal 1, after cleaning the seal seat;
Caution! It is prohibited to use any other brand of oil in the torque converter than the recommended one.
- before installing a new torque converter, partially fill it with oil;
- lubricate the inner bearing surface of the torque converter seal with oil;
- slowly and carefully insert the torque converter using the tool, rotating it slightly in different directions to facilitate the entry of the splines into the grooves.
(Source can be seen at peugeotbook)