2. Mark the mounting position of the pressure plate on the flywheel.
3. Lock the flywheel with a screwdriver and a punch or a suitable stop shoe, securing it to the flywheel ring gear.
4. Loosen the pressure plate mounting bolts one by one to one and a half turns each time until the pressure plate fit is loosened. Then unscrew the pressure plate mounting bolts completely.
Caution! If you loosen the bolts too soon, you can damage the diaphragm spring, as well as the mounting pins between the pressure plate and the flywheel.
5. Remove the pressure and driven clutch discs.
6. Remove the release bearing 1 of the clutch using a suitable mandrel, for example mandrel "a", catalog number of which is 0216-D (see illustration).
3.6 Remove the clutch release bearing using the tool "a" 0216-D