2. Open the hood.
3. Disconnect the wire terminal «masses» (-) from the negative pole of the battery.
4. Wring out clamps and remove overlays 1 (see illustration).
2.4 Squeeze out the latches and remove the lining 1
5. Remove clips 2 and 3 (see illustration 2.4).
6. Acting in the niche of the wheel arch, remove the mudguard 4 by prying it with a screwdriver (see illustration).
2.6 Acting in the niche of the wheel arch, remove the mudguard 4 by prying it with a screwdriver
7. Remove latch 5 (see illustration 2.6).
8. Unscrew the bolts 6 fastening the bumper (see illustration).
2.8 Unscrew the bolts 6 fastening the bumper
9. Pull the bumper towards you, disconnect all wires that prevent dismantling (see illustration).
2.9 Pull the bumper towards you, disconnect all parts and plugs that prevent dismantling
10. Remove the bumper, working together with an assistant.
Installation of a forward bumper is made in sequence, return to removal.