Attention! Vehicles with diesel engine DKSATE since 1998 are equipped with two radiators (see illustration 3.0).
Attention! The procedure is given on the example of cars with a gasoline engine ES9J4.
1. Drain the coolant.
2. Disconnect hoses 1 from the radiator (see illustration).
3.2 Disconnect hoses 1 from the radiator
3. Feed the front cross member of the bulkhead towards you, without disconnecting the wiring harnesses and plugs from it.
4. Release the radiator from holders 2 (see illustration).
3.4 Release the radiator from holders 2
5. Remove radiator 3 by gently pushing it up (see illustration).
3.5 Remove radiator 3 by gently pushing it up
The radiator is installed in the reverse order of removal.
6. Upon completion of work, fill in the coolant and remove air from the system.