Attention! To remove the inner spherical joint of the steering rod from the rack it is necessary to use a special wrench Peugeot No. 0707.
Removing
1. Remove the tie rod ball joint.
2. Loosen the clamps and remove the protective cover of the steering mechanism.
3. Using a Peugeot #0707 wrench, unscrew the tie rod inner ball joint from the rack.
4. Remove the tie rod. Check up a condition of an internal spherical hinge and steering draft.
Installation
1. Screw the ball joint into the gear rack to the required torque.
2. Establish a protective cover of the steering mechanism on its case and steering draft. Secure it with clamps.
3. Install the tie rod ball joint.