Front suspension — design description Front suspension elements 1 - support of the upper rack holder; 2 - the upper cup of the spring; 3 - spring; 4 - shock absorber; 5 – rotary fist; 6 - ball joint; 7 - casing; 8 - lever; 9 - front metal-rubber element of...
Specifications of the front suspension Springs Spring diameter 157 mm Spring wire diameter 12 mm Elasticity (on the wheel) 62 mm / 1000 N full deflection (on the wheel) 195.2 mm Stabilizer Diameter: 20 mm. From body #8063730, the diameter of the stabilizer...
Swivel fist — removal and installation Attention! All Nyloc nuts loosened during removal must be replaced with new ones. The threads of these nuts are coated with an anti-twist compound that is only effective the first time the nut is used. Attention! Do not...
Replacing the front wheel bearing Attention! The double row roller bearing requires no adjustments and is lubricated to provide bearing performance for the life of the vehicle. When installing the bearing, a new circlip must be used. 1. Remove the...
Front pillar — removal and installation Removing Attention! All Nyloc nuts loosened during removal must be replaced with new ones. The threads of these nuts are coated with an anti-twist compound that is only effective the first time the nut is used. 1. Raise...
A-pillar repair Compressing a spring with a spring compressor 1. Remove the front strut from the car and clean from dirt. Using a special tool, compress the spring so that its upper cup is unloaded. Attention! When using a special...
Lower arm front suspension — removal and installation Attention! All Nyloc nuts loosened during removal must be replaced with new ones. The threads of these nuts are coated with an anti-twist compound that is only effective the first time the nut is used. Attention! Two...
Lower ball joint, front suspension Attention! The Peugeot 0615J special tool is required to install the front suspension lower ball joint. If this tool is not available, replace the lower ball joint at a service station. Special tool Peugeot 0615J for...
Stabilizer bar of the front suspension Attention! New nuts must be used to attach the stabilizer connector. Stabilizer mount 1 - connector, 2 - lever, 3 - stabilizer Removing 1. Raise the front of the car and secure it on stands. Remove front wheels. 2....
Front Suspension Stabilizer Bar connector Attention! When installing the connector, new fastening nuts must be used. Removing 1. Raise the front of the car and secure it on stands. Remove front wheels. 2. Unscrew the nuts securing the connectors to the...
Front suspension lower frame — removal and installation Modified bottom frame A - holes with a diameter of 6.0 mm, B - body stiffeners Since November 1988, new bolts have been used to secure the rear of the lower frame. Since mid-1992, the installation of the rear of the...