Exhaust system — removal and installation Each section of the exhaust system can be removed individually or the complete system can be removed as a unit. Even if only one part of the system needs service or replacement, it is often easier to remove the entire...
Emission Control System All models have various built-in fuel system components that help minimize emissions, and all models have at least an emission control system. Models with a catalytic converter are also equipped with evaporative and...
Blow-by gas emission control To reduce the emission of unburned hydrocarbons from the crankcase to the atmosphere, with a sealed engine, blow-by gases and oil vapor are drawn from the crankcase through a wire mesh oil separator into the engine air...
Exhaust Gas Control In order to minimize the amount of pollution that enters the atmosphere, some models are equipped with a catalyst in the exhaust system. On all models with a catalytic converter, the system is closed-loop, where a...
Fuel vapor control Evaporative Emission Control System 1 - filler cap, 2 - charcoal canister, 3 - hose, 4 - calibrated hole, 5 - hose, 6 - cleaning solenoid valve, 7 - coolant temperature sensor, 10 - safety valve To minimize leakage of...
Emission control system Crankcase emission control The components of this system do not require attention, except for checking the internal cleanliness and integrity of the hoses. Fuel vapor control Charcoal canister replacement 1. Raise the...
Catalyst — general information The catalyst is a reliable and simple device that does not need any maintenance, but there are some facts that the owner should be aware of in order to maximize the life of the catalyst: do not use leaded gasoline in a...