Caring for upholstery and rugs Fabric covers Clean upholstered seats with a vacuum cleaner or a stiff brush. Clean heavily soiled seats with dry foam. Treat greasy and oily stains with clean gasoline or stain remover. The cleaning agent must not be...
Central locking — removal and installation Attention! Before carrying out work on the central locking system, remove the ground wire from the battery and connect the battery after work is completed. Electronic control device Removing 1. Remove the glove box to...
Seats — removal and installation Front seats Removing 1. Move the seat all the way forward. 2. Tilt the seatback forward. 3. Loosen the fixing screws (one bolt on each side) the back of the sled to the floor. 4. Move the seat all the way back. 5....
Front seat belt tension mechanism The system is designed to instantly remove any slack in the seat belt in the event of a frontal collision, thereby reducing the threat to the lives of front passengers. Each front seat can be equipped with a belt...
Front seat seat belt Removing 1. Remove the cover, then unscrew the lower seat belt mounting bolt. 2. Remove the headlining side B-pillar trim to access the B-pillar top trim screws. 3. Unscrew the screws securing the trim of the upper part...
Rear side seat belts (saloon models) Removing 1. Remove the rear seat cushion. 2. Remove the seat belt lower anchor bolt. 3. Remove the rear top trim. 4. Remove the rear panel trim located in front of the rear window. 5. Unscrew the bolt and remove the...
Rear side seat belts (combi models) Removing 1. Remove the seat belt lower anchor bolt. 2. Unfold the rear seat. 3. Working in the luggage compartment, unscrew the two screws (A) in front of the side decorative trim and retainer (IN) seat backs. 4. Remove...
Interior trim — removal and installation Steering column covers Removing 1. Remove the negative cable from the battery. 2. On models with a tilt steering column, move the column adjuster lever to the released position. 3. Working under the steering column,...
Upholstery of the ceiling — removal and installation Attention! The headlining is directly glued to the body roof. Removing 1. Disconnect battery. 2. Using a Phillips screwdriver, remove the sun visors. 3. On the center ceiling console, remove the reading light and...
Center console — removal and installation Upgraded center console (models up to 1992) Removing 1. Remove the negative cable from the battery. 2. Move the front seats all the way back. 3. If present, unscrew the fixing screws and remove the side fenders from the...
Instrument panel (models up to 1992) Removing the instrument panel 1 - intermediate screws, 2 - bundles of electrical wires, 3 - front screws located in the engine compartment, 4 - side screws Removing 1. Remove the negative cable from the battery. 2....
Dashboard (models since 1993) Removing 1. Remove the negative cable from the battery. 2. Remove center console. 3. Unscrew two screws (indicated by an arrow), located at the bottom of the ashtray nest. 4. Remove radio. 5. Unscrew two screws...