Table of contents: Removal 🠇 Installation 🠇
Please note! The headlining is directly glued to the body roof.
Removal
1. Disconnect the battery.
2. Using a Phillips screwdriver, remove the sun visors.
3. On the middle ceiling console, remove the reading light and disconnect the lighting wires located on the ceiling.
4. Unscrew the two console mounting screws.
5. Using a small screwdriver as a lever so as not to damage the plastic clips, unhook the trim near the windshield and remove the trim from between the doors.
6. Unhook the rear ceiling lamp and disconnect the wires from it. Remove the ceiling lamp.
7. Using a small flat-head screwdriver, remove the plastic covers of the side brackets to gain access to the fastening elements.
8. Remove the side brackets.
9. Using a hot air supply device, gradually peel off the headlining.
Installation
1. Apply a thin layer of neoprene-based adhesive to the headliner.
2. Apply a layer of glue to the ceiling material.
3. Wait a minute for the glue to dry.
4. Apply the headliner. This should be done by two people.
5. If the upholstery is poorly positioned the first time, it will be almost impossible to move it.