Table of contents: Steering column covers 🠇 Glove box (models before 1992) 🠇 Glove box (models since 1993) 🠇 Carpets 🠇
Steering column covers
Removal
1. Remove the negative cable from the battery.
2. On models with a tilt steering column, move the column adjuster lever to the released position.
3. Working under the steering column, remove the five mounting screws.
4. Then remove the lower steering column cover.
5. Disconnect the connectors from the instrument panel dimmer, radio remote control switch, cruise control switch, and electronic warning light.
6. Remove the upper cover from the steering column.
Installation
Installation is carried out in the reverse order of removal.
Glove box (models before 1992)
Removal
1. Under the glove compartment, remove the two hinge pins using a thin screwdriver.
2. Unscrew the two screws securing the back of the cover and remove the cover.
Installation
Installation is carried out in the reverse order of removal.
Glove box (models since 1993)
Removal
1. Under the glove compartment, remove the two hinge pins using a thin screwdriver.
2. Release the glove box latch and remove the glove box from the panel.
[Original published on the portal: www.PeugeotBook.ru]
Installation
Installation is carried out in the reverse order of removal.
Carpets
The carpet in the car interior consists of one piece and is secured along the edge with screws and pins.
Removing and installing the carpet is very labor-intensive due to the fact that it is necessary to remove all adjacent interior trim: seats, center console and seat belts.