Doors — removal, installation and adjustment Doors 1, 2 - front doors, 3, 4 - rear doors, 5 - hinge, 6, 7 - adjusting plates Attention! These are precise and time-consuming operations and should be performed by two people. Removing The door hinges are welded to...
Door upholstery — removal and installation Attention! Door upholstery may vary depending on trim level. Therefore, the process of removing the upholstery may differ from that stated. Attention! The steps for removing the upholstery of the front and rear doors...
Lock and door opening handles — removal and installation Internal handle Removing 1. Remove door trim. 2. To access the door opening handle, remove the protective film from the door. 3. After unscrewing the inner fastening element of the door handle, pull the handle back...
Door glass — removal and installation Glass 1, 7 - pads, 2 - windshield, 3, 9 - rubber seals, 4, 5 - lowered door windows, 6 - rear side window, 8 - rear window Front door glass Using the Glass Bracket Release Tool on Pre-1992 Models 1 - plastic protrusions...
Trunk lid (Sedan models) — removal and installation Trunk lid 1 - cover, 2 - lining, 3 - rubber seal, 4 - spring, 5 - loop Removing 1. Open the trunk lid. 2. Mark with paint the position of the hinges in relation to the trunk lid. 3. Remove the springs holding the trunk...
Trunk lid lock (Sedan models) — removal and installation Trunk lid lock cylinder Removing 1. Open the trunk lid. 2. Remove the clips securing the trunk trim and unscrew the trunk trim from the upper edge of the luggage compartment. 3. Drill out rivets (arrow) fastening the...
Rear door (Combi models) — removal and installation Backdoor Removing 1. Open back door. 2. Unscrew the mounting screws and remove the plastic trim from the inside of the tailgate. 3. Working around the edge of the carpet trim, release the fasteners and remove the carpet...
Rear door lock (Combi models) — removal and installation Rear door lock cylinder Removing 1. Open back door. 2. Unscrew the mounting screws and remove the plastic trim from the inside of the tailgate. 3. Working around the edge of the carpet trim, release the fasteners and...
Electric windows Attention! If the battery is disconnected with the door window open, the system must be reprogrammed after the battery is connected. 1. To perform reprogramming, turn on the ignition and roll down the window. 2. Hold...
Windshield and rear glass The glass is glued directly into the frame. This ensures the best streamlining of the body and better sealing against water leakage. It also reduces drag and weight. To replace glass, in addition to a special tool, you...
Sunroof — removal and installation Due to the complexity of the sunroof mechanism, considerable experience and expertise is required to repair, replace, or adjust sunroof components. To access the elements of the hatch, it is necessary to remove the...