Table of contents: Removal 🠇 Installation 🠇
Attention! When installing the connector, it is necessary to use new fastening nuts.
Removal
1. Raise the front of the car and secure it on stands. Remove the front wheels.
2. Unscrew the nuts securing the connectors to the stabilizer and front suspension bracket. Remove them from under the car.
3. Check the condition of the connectors for wear and damage.
Installation
To install the stabilizer, perform the steps in the reverse order of removal, paying attention to the correct installation of the supports and side support elements. The connectors should be screwed when the car is on the ground.
Article based on material from the website peugeotbook.ru