Table of contents: Removal 🠇 Installation 🠇
Attention! New nuts must be used to secure the stabilizer connector.
Stabilizer mount
1 – connector, 2 – lever, 3 – stabilizer
Removal
1. Raise the front of the car and secure it on stands. Remove the front wheels.
2. Unscrew the bolts securing the stabilizer connectors to the lower arms.
(Article based on material from the website: PeugeotBook.ru)
3. Unscrew the nuts securing the connectors to the anti-roll bar.
4. Apply alignment marks to the stabilizer and stabilizer mounting clamps to the lower frame.
5. Unscrew the clamp bolts (A) and remove the clamps securing the stabilizer to the lower frame, without having to remove the metal clamp (B).
6. Remove the stabilizer from under the car.
Installation
Installation is carried out in the reverse order of removal.