The heater switches are located on the central panel.
1 - cabin ventilation switch. When switched on, air is supplied to the passenger compartment from the outside.
2 - air recirculation mode in the cabin. This mode is used to quickly warm up the passenger compartment and also to prevent odorous air from entering the passenger compartment when driving in odorous areas.
Attention! When using the air recirculation mode in the cabin, it should be borne in mind that in this case the windows will quickly fog up.
3 - blowing the windshield. Pressing this key automatically switches to outside air intake.
4 - blowing the top of the cabin. Air enters the cabin from the side and central deflectors.
5 - blowing the top and floor of the cabin. Air enters the passenger compartment from the side and central vents, as well as from the vents for blowing the footwells and rear vents of the passenger compartment.
6 - blowing the interior floor.
7 - blowing the windshield and the floor of the cabin.
8 - temperature controller. For interior ventilation, the regulator must be in the blue range, and for heating - red
9 - interior blower switch. The fan has five speed modes of rotation.