1 - automatic operation of the heater and air conditioner. When this mode is enabled, the desired air temperature in the cabin is automatically maintained. If necessary, you can turn on the air conditioner by pressing the button 11. In this case, the lamp A goes out and B lights up.
2 - blowing the windshield. In some cases, especially when there are several passengers in the cabin, in rainy weather, etc. glasses fog up quickly. In this case, it is recommended to turn on the windshield defogger to maintain the desired visibility. When turned on, light C comes on and light A goes out. The set air temperature in the cabin is maintained automatically.
3 - display with indication of settings. During the operation of the heater or air conditioner, the display shows information about the mode on or the set temperature.
- ECO - economical mode of operation. In this case, the air conditioner is turned off.
- MAX - the maximum possible air temperature in the cabin is set (30°С).
- MIN - the minimum air temperature in the cabin is set (15°С).
- RECIRC - cabin air recirculation mode is on.
If the letter E appears on the display, this means that the air temperature in the passenger compartment at the time the air conditioner was turned on was significantly different from the set one and the system is working at full capacity to achieve the desired temperature. In this case, the settings should not be changed until the letter E disappears from the display. The exception is the situation when the set temperature differs significantly from the usual one.
4 - keys for entering the desired temperature in the cabin. Temperature range 15-30°C. It is recommended to set the temperature to 22°C and then adjust it as needed. The set temperature is indicated on the display.
5 - setting the rotation speed of the interior blower fan. The rotation speed of the interior blower fan can be adjusted manually by pressing the button 5 (+) or (-). In this case, the corresponding scale A will be highlighted.
6 - blowing the top of the cabin and windshield.
7 - blowing the top of the cabin.
8 - blowing the top and floor of the cabin.
9 - air recirculation mode in the cabin.
10 - interior ventilation.
11 - air conditioner switch. When the air conditioner is turned off, its signal light B goes out, and the display shows the inscription ECO (economical mode of operation). In this case, only the heater works.
Attention! The manually set interior temperature settings are retained after the ignition is switched off.
Attention! If the letter D flashes on the display for a few seconds when the ignition is switched on, this indicates a malfunction. In this case, it is recommended to contact the workshop.