In order to maintain the appropriate temperature in the cabin, you must press one of the following buttons:
temperature increase button
interior temperature reduction button
Automatic air conditioning control panel
Displaying the temperature in the cabin.
In the range from 19°C to 25°C, the temperature is adjusted in half degree increments. Temperatures below or above this range are adjusted in increments of one degree.
Self-diagnosis
If indication A is constantly flashing, then this is evidence of a failure in the system. The air conditioner can however operate without restriction. In such cases, it is recommended to contact the workshop.
If arrows appear in front of the temperature indication numbers, this means that the difference between the air temperature in the cabin at the moment and the set one is large enough and the system will need time to eliminate this difference. As soon as this difference decreases, the arrows will disappear.
This message appears after turning off the air conditioner using the A/C button.
This inscription appears after turning on the air recirculation mode by pressing the button
This inscription appears when the nominal temperature reaches 15°C.
This indication appears when the maximum nominal temperature of 30°C is reached.
Notation «Min» And «max» appear when the minimum and maximum nominal temperatures are reached.
Automatic operation of the air conditioner
When this mode is enabled, the backlight of the function buttons has a light yellow color. The indicator lights are the same color. The exception is the glass defroster button backlight. It is colored dark yellow. Each function button has its own control light.
In automatic mode, the following is also performed:
- air supply,
- interior temperature control, - interior air distribution, - interior ventilation
- forced interior ventilation (cabin air recirculation mode).
Note! During the warm-up phase of the engine after starting, the interior airflow increases gradually to avoid unpleasant drafts.
Manual settings
In the automatic mode of the air conditioner, some functions can be adjusted manually. This does not affect the automatic operation of other air conditioner functions. The auto mode button will turn off. The light on the A/C button stays on.
If the light on the A / C button is on, this means that the cooling system of the air conditioner is turned on and working. When this button is turned off, the cooling system of the air conditioner is turned off and the message appears «ECO».
Supply of outside air to the cabin
Forced ventilation mode (recycling) air in the cabin.
Outside air does not enter the cabin. An inscription appears «RECIRC».
Interior airflow
With button
you can increase the speed of rotation of the interior blower fan, and with the button
- decrease.
The maximum rotation speed of the interior blower fan is indicated by the appearance of seven dashes. To return to automatic mode, just press the button «AUTO».
The interior blower is off. At the same time as the blower is turned off, the cooling system of the air conditioner is also turned off.
Air flow from the deflectors to the passenger compartment
Air flow from the deflectors towards the floor and back into the ducts.
Air flow from the deflectors towards the floor and towards the front glass.
Air flow from the deflectors towards the floor
Attention! The above four directions of interior airflow can be changed by switching to the manual mode of the air conditioner.
Defrosting glasses
The air conditioner defroster quickly defrosts the windshield or removes fogging. This function automatically adjusts the blower and blower temperature.
In order to return to the automatic mode of operation of the air conditioner, you need to press the button «AUTO».