Heating and ventilation system switches (Peugeot 405)

The heating and ventilation system switches are located on the center console. They include:

• a lever (9) moved in a horizontal plane, controlling the air flow;
• three round knobs for controlling the fan mode (6), temperature (7), air distribution (8).

Air Intake Control (9)

Lever in left position : Inlet closed. No ambient air enters the vehicle. The air inside the vehicle is circulated. This position should only be used in exceptional cases, such as to prevent dust or unpleasant odours from entering the vehicle.

Lever in the right position : admission is open.

Air distribution control (8)

By turning the knob counterclockwise, the following four positions can be found:

- position : air is directed only to the side and middle ventilation nozzles;

Source of the article is posted at: www.PEUGEOTBOOK.ru

- position : air is directed only to the feet;

- position : air is directed to the front window, side windows and passengers' feet;

- position : air is directed to the front and side windows. To quickly defrost the windows, set the temperature and fan handles to maximum.

Air temperature control (7)

Mark on the handle in the leftmost position opposite the blue line: off.

Turn the knob clockwise: gradually increase the heating intensity.

Marking on the handle in the right extreme position: maximum heating intensity.

Fan control (6)

Mark on the handle in the extreme position after turning counterclockwise: off.

Turn the knob clockwise: gradually increase the amount of air supplied.

Side and middle ventilation nozzles

On both sides of the front panel there are two air outlets, covered with special grilles, which allow you to set and adjust the direction of the air flow.

Special outlets direct air to the glass when the air distribution handle (8) is in the position or .