Outside rearview mirror
Removing
1. Turn off the ignition.
2. Remove the inner door trim panel as described in paragraph 11, and then carefully remove the mirror trim panel (pic. 19.2).
Pic. 19.2. Carefully remove the mirror trim panel
3. Disconnect the mirror electrical connector (pic. 19.3).
Pic. 19.3. Disconnect the mirror electrical connector
4. Remove the three screws and remove the mirror from the door frame (pic. 19.4).
Pic. 19.4. Remove three screws (marked with arrows) and remove the mirror from the door frame
Installation
5. Installation is carried out in the reverse order of removal.
Mirror glass
Removing
6. Tilt the glass down, and then put your hand behind it and pull the top of the glass away from the adjuster plate to release the clips (pic. 19.6).
Pic. 19.6. Tilt the mirror glass down, put your hand behind it and pull the top of the glass away from the adjustment plate
7. Remove the glass and disconnect the electrical connector (in the presence of) (pic. 19.7).
Pic. 19.7. Remove the mirror glass and disconnect the electrical connector
Installation
8. If applicable, line up the electrical connectors, and then press the glass into the mirror until it locks into place.