Removing
Release models prior to September 2002
1. Open and support the hood.
2. Remove the wiper arms as described in chapter 12.
3. Turn out the screw of fastening of the right panel of a lattice of a cowl.
4. Using a suitable fork tool, release the lock on the right end of the panel.
5. Release the latches on the right panel of the hood grill by turning each 90°, and then remove the right panel.
6. Similarly remove the left panel.
Release models after September 2002
7. Open and support the hood.
8. Remove the wiper arms as described in chapter 12.
9. Turn out the screw of fastening of a corner of the panel to a forward wing.
10. Release the latches on the right panel of the hood grille by turning each 180°, and then remove the right panel (pic. 24.10).
Pic. 24.10. Release the clips on the right panel of the hood grille, and then remove the right panel
11. Similarly, remove the left panel (pic. 24.11).
Pic. 24.11. Remove the left grille panel in the same way
Installation
12. Installation is carried out in the reverse order of removal.