Cooling system deaerator and fan fuses
Figure A: 1 – cooling system deaerator
Figure B: 1 – cooling system deaerator, 2 – fan fuses
Installing a thermostat
1. Open the deaerators.
2. Fill the cooling system through the expansion tank.
3. Close the deaerators when coolant begins to flow out of them.
4. Add coolant to the maximum level.
5. Start the engine and warm it up until the fan comes on.
6. Turn off the engine.
7. Add coolant to the reservoir to the appropriate level.
8. Screw the plug into the second hole.