Radiator mounting bolt and installation groove
A – radiator mounting bolt
B – installation groove
Removal and installation
1. Raise the front of the car.
2. Drain the coolant from the system or pinch the coolant supply hoses to the oil radiator.
3. Place a container under the oil filter and unscrew the filter.
4. Remove the coolant supply hoses to the oil radiator.
View the original on the website: peugeotbook.ru
5. Unscrew the oil radiator mounting bolt from the cylinder block and remove the radiator.
6. Install a new O-ring on the radiator recess on the cylinder block side.
7. Install the radiator on the cylinder block, while the installation groove must be aligned with the protrusion on the cylinder block.
8. Install the oil filter.
9. Fill the system with coolant.