Distributor Ducellier
1 - distributor cover, 2 - distributor rotor, 3 - dust cover, 4 - distributor housing, 5 - lower holder, 6 - pulse generator, 8 - centrifugal regulator, 9 - vacuum regulator
Disassembly
1. Remove distributor.
2. Remove the distributor rotor and dust cover.
3. Unscrew the three bolts securing the upper part of the distributor.
4. Tilt and remove the top.
5. Extract Node "wire-connector".
6. Remove plastic ring, pulse generator and vacuum regulator (1 bolt).
Assembly
1. Install the pulse generator and the vacuum regulator, inserting its engagement axis into the hole of the tabbed disk (dash on the disk opposite the hole).
2. Install the plastic ring.
3. Install the upper part of the distributor: tighten the bolts securing the vacuum regulator and the three bolts of the upper part.
4. Install Node "wire-connector".
5. Install the rotor and dust cover.
6. Install distributor.