The system works as follows. The compressor compresses the reagent and feeds it to the condenser mounted on the front of the radiator, where the reagent becomes liquid and reduces its temperature. The liquid reagent passes through the expansion valve to the evaporator, where it expands from a high-pressure liquid to a low-pressure gas. This expansion is accompanied by a decrease in temperature, which cools the evaporator. The reagent returns to the compressor and the cycle repeats.
The air that has passed through the evaporator enters the distributor, where it mixes with the hot air that has passed through the heater, resulting in the set air temperature being achieved.
Attention! Work on the air conditioning system must be carried out in specialized workshops. The air conditioning system is filled with a special reagent (Freon), so it is impossible to depressurize the system without special knowledge and equipment.
Attention! The only action that can be performed independently on the air conditioning system is replacing the compressor drive belt.