Attention! When removing and installing the rear suspension shock absorbers, the car must stand on its wheels.
Installing the shock absorber
1 – shock absorber, 2 – crossbar mount, 3 – lever mount
X = 328 mm – distance of the shock absorber axis when screwing the connections
1. Place the car on the lift.
2. Unscrew the nut securing the shock absorber to the suspension arm and remove the gasket.
3. Move the axle back to remove the shock absorber from the socket on the lever.
4. Unscrew the nut securing the shock absorber to the upper axle.
5. Remove the shock absorber and install a new one in its place together with the axles. Do not screw the connections.
6. Set the shock absorber mounting point axis distance to size X = 328 mm by compressing the suspension using the 0.908U tool.
7. Tighten the nuts to the appropriate torque.