8. Establish the fuel pump together with the gauge of the index of a stock of fuel on its seat.
9. Make sure that the arrow 8 on the pump housing is aligned with the marks 9 on the fuel tank (see illustration).
3.9 Make sure that the arrow 8 on the pump housing is aligned with the marks 9 on the fuel tank
10. Screw on the ring nut and tighten it to 30 Nm.
11. With the correct fit of the parts, mark 10, arrow 8 on the pump housing and mark 9 on the fuel tank must be aligned. If mark 10 is in position A, then tighten the ring nut so that arrows 8 and 9 are aligned. If mark 10 is in position B, then the nut should be unscrewed and the correct fit of the parts checked (see illustration).
3.11 With the correct fit of the parts, mark 10, arrow 8 on the pump housing and mark 9 on the fuel tank must be aligned. If mark 10 is in position A, then tighten the ring nut so that arrows 8 and 9 are aligned. If mark 10 is in position B, then the nut should be unscrewed and the correct fit of the parts checked
Further, the installation of the dismantled components is carried out in the reverse order of removal.