Resetting the service interval display (Peugeot Partner I)

1. After completing service, reset the service interval display as described below.

2. With the ignition off, press and hold the trip meter button.

3. Turn on the ignition and the display will start counting down. When the countdown reaches 0, release the trip meter button and the service symbol (wrench) on the display will disappear.

4. Turn off the ignition.

5. Turn on the ignition and check that the distance to the next service is indicated correctly on the display.

Note: If you need to disconnect the battery after performing this procedure, lock the vehicle and wait at least 5 minutes. Otherwise, the display reset will not be accepted.

(Original is contained on the portal: «PEUGEOTBOOK»)