Table of contents: Basic parameters of the steering…🠇 Main parameters of power steering 🠇 Tightening moments 🠇
Basic parameters of the steering gear without power steering
| Gear ratio | 23,8 |
| Number of teeth of drive gear | 6 |
| Number of steering wheel turns from lock to lock | 4,14 |
| Turning diameter: | |
| - between the walls | 11.00 m |
| - between the sidewalks | 10.55 m |
Main parameters of power steering
| Gear ratio | 17,9 |
| Number of teeth of drive gear | 8 |
| Number of steering wheel turns from lock to lock | 3,13 |
| Turning diameter: | |
| - between the walls | 11.00 m |
| - between the sidewalks | 10.55 m |
| Pump drive belt | Hutchinson 970 K4 |
| Oil for power steering system: | |
| - quantity | about 0.70 dm³ |
| - recommended type | ATF Dexron H, Esso D 21065 or Shell 20137 |
| Service | every 20,000 km of mileage the oil level should be checked |
Tightening moments
| Steering knuckle ball joint nut | 35 Nm |
| Tie rod lock nut | 45 Nm |
| Fastening the steering wheel shaft to the transmission rack | 15 Nm |
| Steering wheel mounting nut | 35 Nm |
| Steering gear mounting bolts: | |
| - models before 1992 | 40 Nm |
| - models since 1993 | 90 Nm |
| Steering Tie Rod Ball Joint: | |
| Early (solid) hub fastener | 45 Nm |
| Later (hollow) hub mounting element | 35 Nm |
Original can be viewed at www.PeugeotBook.ru